Category : Plate and Angle Rolls

APK 550 Profile Bending Machine

Standard Equipments

  • Machine body is ST-52 steel construction
  • On APK 280-240 and APK 180 rolls are driven by a hydraulic motor + planetry gearbox. On APK 300 top and lower rolls are driven with two seperate planetrygearbox. On APK 550 rolls are driven via 3 seperate hydraulic motor.
  • Variable speed of rotation on APK 180, 240, 280
  • Special steel gears
  • Shafts made of special steel, hardened and grounded
  • Manual lubrication
  • On APK 550, APK 300, APK 280, APK 240 and APK 180 guide rolls are hydraulic adjustable
  • Lower rolls are hydraulic moveable up and down
  • Digital display for lower rolls
  • Seperate and moveable control panel
  • Horizontal working
  • 400 volt / 50 hz
  • AKYAPAK Service assurance
  • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments

  • Special rolls for tubes, profiles and angles
  • Special tooling system for bending H, I, U profiles
  • Spiral bending device
  • Variable speed of rotation on APK 300, APK 360, APK 550
  • Minimum speed mechanism for lower roll’s up and down move
  • Extended shafts
  • Digital display for hydraulic guide rolls
  • NC Playback Control System
  • CNC Graphic Control System
  • Joystick control

APK 300 NC Profile Bending

Standard Equipments

  • Machine body is ST-52 steel construction
  • On APK 280-240 and APK 180 rolls are driven by a hydraulic motor + planetry gearbox. On APK 300 top and lower rolls are driven with two seperate planetrygearbox. On APK 550 rolls are driven via 3 seperate hydraulic motor.
  • Variable speed of rotation on APK 180, 240, 280
  • Special steel gears
  • Shafts made of special steel, hardened and grounded
  • Manual lubrication
  • On APK 550, APK 300, APK 280, APK 240 and APK 180 guide rolls are hydraulic adjustable
  • Lower rolls are hydraulic moveable up and down
  • Digital display for lower rolls
  • Seperate and moveable control panel
  • Horizontal working
  • 400 volt / 50 hz
  • AKYAPAK Service assurance
  • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments

  • Special rolls for tubes, profiles and angles
  • Special tooling system for bending H, I, U profiles
  • Spiral bending device
  • Variable speed of rotation on APK 300, APK 360, APK 550
  • Minimum speed mechanism for lower roll’s up and down move
  • Extended shafts
  • Digital display for hydraulic guide rolls
  • NC Playback Control System
  • CNC Graphic Control System
  • Joystick control

APK 280 Profile Bending Machine

Standard Equipments

  • Machine body is ST-52 steel construction
  • On APK 280-240 and APK 180 rolls are driven by a hydraulic motor + planetry gearbox. On APK 300 top and lower rolls are driven with two seperate planetrygearbox. On APK 550 rolls are driven via 3 seperate hydraulic motor.
  • Variable speed of rotation on APK 180, 240, 280
  • Special steel gears
  • Shafts made of special steel, hardened and grounded
  • Manual lubrication
  • On APK 550, APK 300, APK 280, APK 240 and APK 180 guide rolls are hydraulic adjustable
  • Lower rolls are hydraulic moveable up and down
  • Digital display for lower rolls
  • Seperate and moveable control panel
  • Horizontal working
  • 400 volt / 50 hz
  • AKYAPAK Service assurance
  • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments

  • Special rolls for tubes, profiles and angles
  • Special tooling system for bending H, I, U profiles
  • Spiral bending device
  • Variable speed of rotation on APK 300, APK 360, APK 550
  • Minimum speed mechanism for lower roll’s up and down move
  • Extended shafts
  • Digital display for hydraulic guide rolls
  • NC Playback Control System
  • CNC Graphic Control System
  • Joystick control

APK 240 Profile Bending Machine

Standard Equipments

  • Machine body is ST-52 steel construction
  • On APK 280-240 and APK 180 rolls are driven by a hydraulic motor + planetry gearbox. On APK 300 top and lower rolls are driven with two seperate planetrygearbox. On APK 550 rolls are driven via 3 seperate hydraulic motor.
  • Variable speed of rotation on APK 180, 240, 280
  • Special steel gears
  • Shafts made of special steel, hardened and grounded
  • Manual lubrication
  • On APK 550, APK 300, APK 280, APK 240 and APK 180 guide rolls are hydraulic adjustable
  • Lower rolls are hydraulic moveable up and down
  • Digital display for lower rolls
  • Seperate and moveable control panel
  • Horizontal working
  • 400 volt / 50 hz
  • AKYAPAK Service assurance
  • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments

  • Special rolls for tubes, profiles and angles
  • Special tooling system for bending H, I, U profiles
  • Spiral bending device
  • Variable speed of rotation on APK 300, APK 360, APK 550
  • Minimum speed mechanism for lower roll’s up and down move
  • Extended shafts
  • Digital display for hydraulic guide rolls
  • NC Playback Control System
  • CNC Graphic Control System
  • Joystick control

APK 180 Profile Bending Machine

Standard Equipments

  • Machine body is ST-52 steel construction
  • On APK 280-240 and APK 180 rolls are driven by a hydraulic motor + planetry gearbox. On APK 300 top and lower rolls are driven with two seperate planetrygearbox. On APK 550 rolls are driven via 3 seperate hydraulic motor.
  • Variable speed of rotation on APK 180, 240, 280
  • Special steel gears
  • Shafts made of special steel, hardened and grounded
  • Manual lubrication
  • On APK 550, APK 300, APK 280, APK 240 and APK 180 guide rolls are hydraulic adjustable
  • Lower rolls are hydraulic moveable up and down
  • Digital display for lower rolls
  • Seperate and moveable control panel
  • Horizontal working
  • 400 volt / 50 hz
  • AKYAPAK Service assurance
  • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments

  • Special rolls for tubes, profiles and angles
  • Special tooling system for bending H, I, U profiles
  • Spiral bending device
  • Variable speed of rotation on APK 300, APK 360, APK 550
  • Minimum speed mechanism for lower roll’s up and down move
  • Extended shafts
  • Digital display for hydraulic guide rolls
  • NC Playback Control System
  • CNC Graphic Control System
  • Joystick control

APK 121 Profile Bending Machine

Standard Equipments

  • Machine body is steel (ST-52) construction
  • On APK 101, APK 121 and 150 rolls are driven by a hydraulic motor + planetry
    gearbox and gears
  • Shafts made of special steel, hardened and grounded
  • On APK 101 guide rolls are in one direction manual adjustable
  • APK 121 and 150 guide rolls are in two directions hydraulic adjustable
  • One set standard rolls
  • Manual lubrication
  • Lower rolls hydraulic moveable up and down
  • Digital display for lower rolls
  • Separate and moveable control panel
  • Horizontal & vertical working
  • 400 Volt / 50 hz
  • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments

  • Special rolls for tubes, profiles and angles
  • Special mechanic guide Rolls for bending angles (for APK 101)
  • Special tooling sysems for bending U,I,H profiles
  • Spiral bending device
  • Variable speed of rotation
  • Hydraulic adjustable guide rolls in two directions (for APK 101)
  • Digital display for hydraulic guide rolls
  • NC Playback Control System
  • CNC Graphic Control System

APK 101 Profile Bending Machine

Standard Equipments

  • Machine body is steel (ST-52) construction
  • On APK 101, APK 121 and 150 rolls are driven by a hydraulic motor + planetry
    gearbox and gears
  • Shafts made of special steel, hardened and grounded
  • On APK 101 guide rolls are in one direction manual adjustable
  • APK 121 and 150 guide rolls are in two directions hydraulic adjustable
  • One set standard rolls
  • Manual lubrication
  • Lower rolls hydraulic moveable up and down
  • Digital display for lower rolls
  • Separate and moveable control panel
  • Horizontal & vertical working
  • 400 Volt / 50 hz
  • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments

  • Special rolls for tubes, profiles and angles
  • Special mechanic guide Rolls for bending angles (for APK 101)
  • Special tooling sysems for bending U,I,H profiles
  • Spiral bending device
  • Variable speed of rotation
  • Hydraulic adjustable guide rolls in two directions (for APK 101)
  • Digital display for hydraulic guide rolls
  • NC Playback Control System
  • CNC Graphic Control System

APK 81 Profile Bending Machine

Standard Equipments

  • Machine body is steel (ST-52) construction
  • On APK 61 – 81 rolls are driven by hydro motor+planetry gearbox and gears
  • Shafts made of special steel (42CrMo4), hardened and grounded
  • One set standard rolls
  • Lower rolls hydraulic moveable up and down
  • Digital display for lower Rolls
  • Separate and moveable control panel
  • Guide rolls are in one direction manual adjustable
  • Manual lubrication
  • Horizontal and vertical working
  • 400 Volt / 50 hz
  • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments

  • Special rolls for tubes, profiles and angles
  • Adjustable guide rolls for angle profiles
  • Spiral bending device
  • Variable speed of rotation
  • Motors in veriable volt and frequency
  • For APK 81 hydraulic adjustable guide rolls in two directions
  • Digital display for hydraulic guide rolls
  • NC Playback Control System
  • CNC Graphic Control System

APK 61 Profile Bending Machine

Standard Equipments

  • Machine body is steel (ST-52) construction
  • On APK 61 – 81 rolls are driven by hydro motor+planetry gearbox and gears
  • Shafts made of special steel (42CrMo4), hardened and grounded
  • One set standard rolls
  • Lower rolls hydraulic moveable up and down
  • Digital display for lower Rolls
  • Separate and moveable control panel
  • Guide rolls are in one direction manual adjustable
  • Manual lubrication
  • Horizontal and vertical working
  • 400 Volt / 50 hz
  • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments

  • Special rolls for tubes, profiles and angles
  • Adjustable guide rolls for angle profiles
  • Spiral bending device
  • Variable speed of rotation
  • Motors in veriable volt and frequency
  • For APK 81 hydraulic adjustable guide rolls in two directions
  • Digital display for hydraulic guide rolls
  • NC Playback Control System
  • CNC Graphic Control System

APK 50 Profile Bending Machine

Standard Equipments

  • Machine body is steel (ST-52) construction
  • On APK 61 – 81 rolls are driven by hydro motor+planetry gearbox and gears
  • Shafts made of special steel (42CrMo4), hardened and grounded
  • One set standard rolls
  • Lower rolls hydraulic moveable up and down
  • Digital display for lower Rolls
  • Separate and moveable control panel
  • Guide rolls are in one direction manual adjustable
  • Manual lubrication
  • Horizontal and vertical working
  • 400 Volt / 50 hz
  • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments

  • Special rolls for tubes, profiles and angles
  • Adjustable guide rolls for angle profiles
  • Spiral bending device
  • Variable speed of rotation
  • Motors in veriable volt and frequency
  • For APK 81 hydraulic adjustable guide rolls in two directions
  • Digital display for hydraulic guide rolls
  • NC Playback Control System
  • CNC Graphic Control System