Category : AKYAPAK Plate Rolls

AHS 4 Rolls Hydraulic Plate Roll Machine

Akyapak manufactures 4 Rolls Hydraulic Plate Bending Machines with the bending capacity range of 2 mm to 200 mm thickness and 1000 mm to 12000 mm in width/ length.

The frames of our machines are fabricated, welded steel (ST-52). Roll shafts, materials and bearings used in production are European quality. Also the torque limit of the machines is very high. NC playback and CNC graphic control systems are available as optional accessory.

The “Emergency Stop” button in large machinery stops all functions of a machine in an emergency situation. The “Emergency Stop” button located at both sides of the front side of the machine and also on the control panel is a part of high level security precautions.

Side supports and elevator carry the weight of the iron sheet and prevent deformation.

Out feding of the bent sheet is easy by the opening of hydraulic drop end.

Since the swing guides are designed according to the levelarm pirinciple, the machine provides more power to bend the material and by the help of this power, pre-bending is getting perfect and flat ends is decreased to minimum level.

Standard Equipments;

  • Cone Bending device
  • Induction hardened rolls
  • Digital display for both side rollers
  • Machine body is steel (ST-52) construction
  • Seperate control panel
  • Two speed control
  • All rollers mounted in bearing
  • Drop end controlled from control panel in order to release easily bent metal sheet and lifted upper rolls
  • Cone open and close controlled from panel
  • Center rolls are driven with hydraulic motor and planetry gear box
    • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments;

  • Infinitively variable speed of rotation
  • Side and central supports for big sheet metal diameters
  • Metarial feed table
  • CNC Graffic control system
  • NC Playback control system
  • Changeable top roll with small diameters
  • Oil cooling system
  • Calibration

AHK 3 Rolls Hydraulic Plate Bending Machine

Three Rolls Hydraulic Plate Bending Machines produced by AKYAPAK AKBEND are able to bending 2 mm to 200 mm in thickness and width of 1000 mm 12000 mm sheet metal materials in high quality and in an easy way.

AHK Machines have extremely strong bodies in view of welded St-52 steel construction body, roll shaft diameters and materials, bearing used and bending moment are produced.

Three rolls are driven with three separate hydraulic motor and / or reducer (rolls ø 230 mm. machine and its top). All the rolls of our hydraulic plate bending machines produced by AKYAPAK AKBEND are embedded with self-aligning roller bearing. In this way, by being reduced of the friction force, the machine is strengthened more.

It is offered various options to facilitate the process of bending of three rolls hydraulic
plate bending machines.

These are;

  • Infinitely adjustable variable speed of rotation
  • Side and central supporters for big sheet metal diameters
  • Extended spindles
  • Profile of rolls
  • Material feed table
  • Oil cooling system

Standard Equipments;

  • Cone Bending device
  • Induction hardened rolls
  • Digital display for both side rollers
  • Machine body is steel (ST-52) construction
  • Seperate control panel
  • Two speed control
  • All rollers mounted in bearing
  • Drop end controlled from control panel in order to release easily bent metal sheet and lifted upper rolls
  • Cone open and close controlled from panel
  • Center rolls are driven with hydraulic motor and planetry gear box
    • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments;

  • Infinitively variable speed of rotation
  • Side and central supports for big sheet metal diameters
  • Metarial feed table
  • CNC Graffic control system
  • NC Playback control system
  • Changeable top roll with small diameters
  • Oil cooling system
  • Calibration

ASM-S 3 Rolls Asymetrical Plate Roll Machine

ASM-S, stand out as a high quality asymetrical plate roll machine with its user friendly features. ASM-S model is made of complete steel (ST-52) construction, strong and powerfull. The top and lower rolls are driven by electric motor + gearbox and gear system.

Standard Equipments;

  • Induction hardened rolls.
  • Backroll with motor.
  • Cone bending device.
  • Body steel (St-52) construction.
  • Rolls are produced by special steel.
  • Machine designed in asymetrical working principle.
  • Central rollers powered with electric motor + gearbox and gear system.
  • Upper roll is opanable by side.
  • Seperate control panel.
  • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments;

  • Digital display for backroll
  • Lower roll with motor
  • Extended rolls.
  • Profile rolls.

ASM 3 Rolls Asymetrical Plate Roll

ASM model is made of cast iron construction. ASM machines are combining the user friendly features, quality and best prices as an economical model.

Standard Equipments;

  • Body is made of cast iron construction
  • Central rollers powered with electric motor, gearbox and gear drive
  • Cone bending device
  • Self brake main motor
  • Upper roll is opanable by side
  • Lower roll and back roll are with hand wheels up & down adjustable.
  • Seperate eletric control panel with foot pedal
  • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments;

  • Induction hardened rolls.
  • Back roll with motor.
  • Digital display.

AS3 Rolls Asymetrical Plate

Standard Equipments;

  • Body is made of cast iron construction
  • Central rollers powered with electric motor and gear drive
  • Cone bending device
  • Self brake main motor
  • Upper roll is opanable by side
  • Lower roll and back roll are with hand wheels up & down adjustable.
  • Separate eletric control panel with foot pedal
  • Emergency stop
  • Suitable for CE, ISO 9001-2008, TSEK and TURQUM certificates

Optional Equipments;

  • Induction hardened rolls
  • Back roll with motor
  • Digital display